COMAND controller and pressing W to
confirm.
X
Using Geo-Coordinates
Select
press W to confirm.
An entry menu appears.
You can now enter the latitude and longitude
coordinates.
X
To change a value: turn cVd the
COMAND controller.
X
To move the mark within the line: slide
XVY the COMAND controller.
X
To move the mark between the lines:
slide ZVÆ the COMAND controller.
X
To confirm the value: press W the
COMAND controller.
i
If the selected position is outside the
digital map, COMAND uses the nearest
digitized road for route calculation. You will
The coordinates are off the
see the
map
message. If the selected position is
located over a body of water, you will see
The destination is in
the message:
a body of water. Please select
another destination.
Intermediate stop
Entering an intermediate stop
X
To switch to navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X
Select
system menu bar by turning cVd the
COMAND controller and pressing W to
confirm.
and
Intermediate stop categories
Option 1: the route does not have an
intermediate stop.
X
Select
X
Select a category; see option 2.
Option 2: the route already has an
intermediate stop.
X
Select
confirm.
Example: search results for the chosen category
COFFEE SHOP
Highlighted stopover, current distance
:
from vehicle position and name of
stopover
Navigation
Destination
in the navigation
Stopover
and press W to confirm.
Change Stopover
and press W to
307
Z