BMW R 1200 GS Adventure Manual page 126

Bulbs for flashing turn
8
indicators, rear
124
RY10W / 12 V / 10 W
z
Turn bulb 2 clockwise to install
it in the bulb housing.
Working from the inboard side,
insert the glass into the bulb
housing and close the housing.
Install screw 1.
Replacing auxiliary
OE
headlights
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Disconnect plug 1.
Slacken screw 2.