Olivetti d-Color MF45 Operation Manual page 97

Before making copies
No. Part Name
7 [Copy] key
8 [Reset] key
9 [Interrupt] key
10 Auxiliary power button
11 [Stop] key
12 [Start] key
13 Main Power indicator
14 Data indicator
15 [Proof Copy] key
16 Keypad
17 [C] (clear) key
18 [Mode Check] key
19 [Utility/Counter] key
20 [Mode Memory] key
21 Contrast dial
22 [Enlarge Display] key
23 [Accessibility] key
MF45
Description
Press to enter Copy mode. (As a default, the ma-
chine is in Copy mode.)
While the machine is in Copy mode, the indicator on
the [Copy] key lights up in green.
Press to clear all settings (except programmed set-
tings) entered in the control panel and touch panel.
Press to enter Interrupt mode.
While the machine is in Interrupt mode, the indica-
tor on the [Interrupt] key lights up in green and the
message "Now in Interrupt mode." appears on the
touch panel. To cancel Interrupt mode, press the
[Interrupt] key again.
Pressed to turn on/off machine operations, for ex-
ample, for copying, printing or scanning. When
turned off, the machine enters a state where it con-
serves energy.
Press the [Stop] key during copying to stop the
copy operation.
Press to start copying. When this machine is ready
to begin copying, the indicator on the [Start] key
lights up in green. If the indicator on the [Start] key
lights up in orange, copying cannot begin.
Press to restart a stopped job. For details on jobs,
refer to "Managing jobs (Job list)" on page 12-3.
Lights up in green when the machine is turned on
with the main power switch
Flashes in green while a print job is being received
Lights up in green while a print job is queued to be
printed or while it is printing.
Press to print a single sample copy to be checked
before printing a large number of copies. (See
p. 5-6.)
Use to type in the number of copies to be produced.
Use to type in the zoom ratio.
Use to type in the various settings.
Press to erase a value (such as the number of cop-
ies, a zoom ratio, or a size) entered using the key-
pad.
Press to display screens showing the specified set-
tings.
Press to display the Meter Count screen and the
Utility screen.
Press to register the desired copy settings as a pro-
gram or to recall a registered copy program. (See
p. 5-15.)
Use to adjust the contrast of the touch panel.
Press to enter Enlarge Display mode.
Press to display the screen for specifying user ac-
cessibility functions.
3
3-19