Teeter Hang Ups EP-950 Assembly Instructions Manual page 2

PRE-ASSEMBLY
Before you begin: Review all steps before beginning assembly and read
all precautions before using the inversion table. Carefully adhere to the
Assembly Instructions and Owner's Manual to help ensure user safety
and product integrity.
1. It is your responsibility to familiarize yourself with the
proper use of the equipment and the inherent risks of
inversion, such as falling on your head or neck, pinching,
entrapment or equipment failure.
2. This product is not designed for persons over 6'6" (198
cm) or over 300 lbs (136 kg). Structural failure could occur
or head/neck may impact fl oor during inversion. Serious
injury or death could result.
3. DO NOT
approval and a review of the medical contraindications, as
noted in the Owner's Manual.
4. Failure to assemble and/or use the equipment as directed
may void the manufacturer's warranty on this product and
could result in injury or death.
5. DO NOT
and carefully read the Owner's Manual, viewed the
DVD, reviewed all other accompanying documents, and
inspected the equipment.
6. Choose a level surface for assembling and operating the
table.
7. Follow each step in sequence. Do not skip ahead.
8. Make sure that all fasteners are secure.
9. ALWAYS
rotates smoothly to inverted position and back.
10. Replace defective components immediately and/or keep
the equipment out of use until repair.
WARNING
!
use the equipment without a licensed physician's
use the inversion table until you have thoroughly
test and inspect the table. Make sure the table