Adjust The Flash Output; Synchronising The Output Of The Built-In Flash To The Exposure Compensation; Correcting Red Eyes - Panasonic LUMIX DMC-GM1 Operating Instructions For Advanced Features

9. Stabiliser, Zoom and Flash

Adjust the flash output

Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1
Select the menu.
[MENU] >
2
Press 3/4 to select [Flash Adjust.] and then press [MENU/SET].
3
Press 2/1 to set the flash output and then press [MENU/SET].
•
You can adjust from [
•
Select [n0] to return to the original flash output.
i j
•
[ ] or [ ] is displayed on the flash icon in the screen when the flash level is adjusted.
Synchronising the output of the built-in flash to the Exposure
Compensation
Applicable modes:
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of
the built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
•
For details on Exposure Compensation, refer to P157.

Correcting red eyes

Applicable modes:
When Red-Eye Reduction ([
whenever the flash is used. The camera automatically detects red-eye and corrects the
picture.
[MENU] > [Rec] > [Red-Eye Removal]
Settings: [ON]/[OFF]
•
[ ] is displayed on the icon when it is set to [ON].
Not available in these cases:
• Under certain circumstances, red-eye cannot be corrected.
(P37)
[Rec] > [Flash]
j i
2 EV] to [ 2 EV] in steps of 1/3 EV.
], [ ]) is selected, Red-Eye Removal is performed
207