Panasonic LUMIX DMC-GM1 Operating Instructions For Advanced Features page 338

14. Others
The card is not recognised by the PC.
•
Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
•
If there are two or more USB terminal on a single PC, try connecting the USB connection cable
to another USB terminal.
The card is not recognised by the PC.
(SDXC memory card is used.)
•
Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
•
A message prompting to format the card may be displayed when connecting, but do not format.
•
If the [Access] displayed on the monitor does not disappear, disconnect the USB connection
cable after turning this unit off.
The picture cannot be printed when the camera is connected to a printer.
•
Pictures cannot be printed using a printer that does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB Mode]. (P49,
The ends of the pictures are cut at printing.
•
When using a printer with a Cropping or borderless printing function, cancel this function before
printing.
(For details, refer to the operating instructions for the printer.)
•
When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be
printed.
299)
338