Changing The Information Displayed On The Playback Screen - Panasonic LUMIX DMC-GM1 Operating Instructions For Advanced Features

3. Basic Operation

Changing the information displayed on the playback screen

Press [DISP.] to switch the monitor screen.
•
Screen will switch as follows:
With
¢1
information
4:3
L
1/98 1/98 98
2
F3.5 60 AWB AWB
0
00
¢1 If approximately 1 minute elapses without an operation being performed, part of the display
will disappear. Press [DISP.] or touch the monitor to make the display reappear.
¢2 Not displayed during playback zoom, motion picture playback, sequential playback or a slide
show.
¢3 This is displayed if [Highlight]
¢4 If no operation is performed for a number of seconds, [
disappear.
•
Histogram is displayed in R (red), G (green), B (blue), and Y (luminance) during the playback.
Detailed
information
¢2
display
F3.5 60
0
WB WB AWB
AFS
ISO ISO
200
P
STD. STD. STD.
s
100-0001
4:3
L RGB
(P70) in the [Custom] menu is set to [ON].
69
Histogram
¢2
display
F3.5 60
0 ISO
200
1/98 100-0001
] and other touch icons will
Without
information
(Highlight
¢1, 2, 3, 4
display)
Without
¢4
information