Making The Desired Changes To Mf Assist Settings - Panasonic LUMIX DMC-GM1 Operating Instructions For Advanced Features

6. Focus and Brightness (Exposure) Settings

Making the desired changes to MF Assist settings

Using the [Custom] menu, you can make advanced MF Assist settings.
Setting the display method of the MF Assist (enlarged screen)
[MENU] > [Custom] > [MF Assist]
•
Available settings vary depending on the lens used.
When an interchangeable lens with no focus ring (H-FS12032) is used
Focus can be adjusted when 2(
[ON]
displayed.
Focus can be adjusted when 2(
[OFF]
be displayed.
When an interchangeable lens having a focus ring (H-H020A) is used
MF Assist is displayed when the focus ring of the lens is rotated or 2(
[ ]
pressed.
[ ] MF Assist is displayed when the focus ring of the lens is rotated.
MF Assist is displayed when 2(
[ ]
[OFF] MF Assist is not displayed even when the focus ring of the lens is rotated.
Changing the display of the MF Assist
[MENU] > [Custom] > [MF Assist Display]
[FULL]: Enlarges the display in a window on the screen.
[PIP]: Enlarges the display in full screen.
•
The display of the assist screen can also be switched by touching [
adjustment screen.
•
When the control dial is rotated, the display can be enlarged/reduced up to approximately 3 to
6 times in [PIP]. In [FULL], it can be enlarged/reduced up to approximately 3 to 10 times. The
display is enlarged/reduced by a factor of 1.
•
The display can also be enlarged/reduced by pinching out/pinching in.
) is pressed and the MF area setting screen is
) is pressed. The MF area setting screen will not
) is pressed.
153
) is
] on the focus