6. Focus and Brightness (Exposure) Settings
Characteristics of the ISO sensitivity
Recording location
(recommended)
Shutter speed
Noise
Jitter of the subject
•
For the focus range of flash when [AUTO] is set, refer to P201.
•
In Shutter-Priority AE Mode, [
[
] cannot be used.
•
When [Multi Exp.] is set, the maximum setting is [ISO3200].
•
Setting items below will be selectable in Creative Video Mode.
[AUTO]/[200] to [3200]
•
Those menu items are shared by the [Rec] menu and the [Motion Picture] menu. When the
setting for either of the two is changed, the setting for the other is also changed.
Setting the upper limit on ISO sensitivity
Applicable modes:
It will select optimal ISO sensitivity with set value as limit depending on the brightness of
the subject.
•
It will work when the [Sensitivity] is set to [AUTO] or [
[MENU] >
[Rec] > [ISO Limit Set]
Settings: [400]/[800]/[1600]/[3200]/[6400]/[12800]/[25600]/[OFF]
Not available in these cases:
•
[ISO Limit Set] is disabled in the following cases:
–
[Clear Nightscape]/[Cool Night Sky]/[Warm Glowing Nightscape]/[Handheld Night Shot]
(Scene Guide Mode)
–
When recording motion pictures
200
When it is light (outdoors)
Slow
Less
Increased
] cannot be used; in Manual Exposure Mode, [AUTO] and
159
25600
When it is dark
Fast
Increased
Less
].