12. Using the Wi-Fi function
Sending images in the camera to an SNS
1
Connect to a smartphone/tablet.
2
Select [
] on a smartphone/tablet.
3
Drag an image to send it to an SNS, etc.
•
The image is sent to a web service such as an SNS.
•
The function can be assigned to the top, bottom, left or
right according to your preference.
Sending location information to the camera from a smartphone/tablet
You can acquire location information from a smartphone/tablet, and write it on images
afterwards.
Refer to
P224
for how to write the location information on the images recorded by this unit.
•
Read the [Help] in the "Image App" menu for further details on how to operate.
•
To change the setting or disconnect, press [Wi-Fi].
•
Cautions for Use:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject
when you use this function. Use at your own risk.
•
If you have changed the clock setting of this unit or the smartphone/tablet after [Time sync],
perform [Time sync] again.
•
On the smartphone/tablet, you can set the acquisition interval of location information and check
the transfer status of location information.
Refer to [Help] in the "Image App" menu for details.
•
(When using "Image App" for iOS)
If you press the Home or On/Off button of a smartphone/tablet while [Rec. loc. Info] is working,
location information recording is stopped.
Not available in these cases:
•
The smartphone/tablet may fail to acquire location information in China and the border area in
the neighbouring countries of China.
(As of October 2013)
(P246)
(P242)
248