Removing And Replacing The Transceiver Pc Board - Motorola L6 Service Manual

Disassembly

Removing and Replacing the Transceiver PC Board

G
G
24
1. Remove the battery cover, battery, SIM, and rear housing as described in the
procedures..
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent ESD and component damage.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2. Insert the flat end of the disassembly tool under the flex connector to unseat
it from the transceiver PC board (see Figure 12).
Flex Connector
Figure 12. Removing the Transceiver PC Board Connectors
3. Use the metal tweezers to unseat the alert speaker connector from it's socket
on the transceiver PC board (see Figure 12).
4. Use the disassembly tool to unseat the flex connector from its socket on the
Transceiver PC board (see Figure 12).
October 14, 2005
Display Flex Connector
Alert Speaker Cable
Coaxial Cable
L6
050783o
6809495A75-O