Level 1 and 2 Service Manual
Removing and Replacing the Keypad
6809495A75-O
1.
Remove the battery cover, battery, SIM, rear housing, and transceiver PC
board, as described in the procedures.
2.
Lift the keypad up from one corner as shown in Figure 21 and remove it from
the front housing.
Plastic tweezers
Keypad
Figure 21. Removing and Replacing the Keypad
3.
To replace, align the keypad with the front housing and press it into place.
4.
Reassemble the transceiver PC board, rear housing, SIM, battery, and battery
cover as described in the procedures.
October 14, 2005
Receiver
Front Housing
Disassembly
051594o
31