YASKAWA Varispeed CIMR-G7A Instruction Manual page 265

Con-
stant
Number
L2-04
* 1. The factory setting will change when the control method is changed. The open-loop vector 1 control factory settings are given.
* 2. The factory setting depends on the Inverter capacity. The value for a 200 V Class Inverter of 0.4 kW is given.
Multi-function Contact Inputs (H1-01 to H1-10)
Set-
ting
Value
61 External search command 1 (ON: Speed search from maximum output frequency)
62 External search command 2 (ON: Speed search from set frequency)
-64
6
Name
Description
Display
Voltage recov- Sets the time required to return the
ery time Inverter output voltage to normal
voltage at the completion of a speed
search, in units of one second.
PwrL V/F
Sets the time required to recover
Ramp t
from 0 V to the maximum voltage.
Setting Factory
Range Setting
0.3 s
0.0 to
*2
5.0
Function
Control Methods
Change
Open
during
V/f Flux
Loop
Opera-
V/f with Vec-
Vector
tion
PG tor
1
No A A A A
Control Methods
Open
V/f Loop Flux
V/f with Vec- Vec-
PG tor
1
Yes No Yes
Yes No Yes
Open
Loop
Vector
2
A
Open
Loop
Vec-
tor tor
2
No Yes
No Yes