Drill A Hole In The Wall - LG AMNH096VEA0 Service Manual

• Secure the Installation plates onto the Suspension
bolts (adjust level roughly.) using nuts, washers and
spring washers.
• Engage 2 hooks on the both left and right side of the
unit to the lower slot of Installation Plates.
• Adjust a level with a level gauge on the direction of
left-right, back-forth by adjusting suspension bolts.
• Move the hooks on the unit to the upper slot of
Installation Plates. Then the unit will be declined to
the bottomside so as to drain well.

Drill a Hole in the Wall

• Drill the piping hole with a ø70mm hole core drill.
Drill the piping hole at either the right or the left with
the hole slightly slanted to the outdoor side.
Anchor nut
Ceiling
Nut
Washer
820
Suspension
bolts
Suspension bolt
Center-line for the
piping hole
WALL
Indoor
Installation
235
Suspension
bolts
Spring
washer
Nut
Hangen
Max.
12mm Washer
Outdoor
Service Manual 59