LG AMNH096VEA0 Service Manual page 129

2. Art Cool Type Indoor Unit
CAUTION: Disconnect the unit from
power supply before making any
checks.
Be sure the power switch is set to
"OFF".
1. To remove the Grille from the Chassis.
- Pull the grille bottom, the remove 2 securing screws.
- Lift the both lower parts of panel front.
- After pull down this panel a bit, separate connecting
wire with product.
2. To remove the Control Box.
- Before removing the control box, be sure to
disconnect the wires from PWB.
- Pull the cover control out from the control box
and disconnect other wires.
- Remove securing screws.
- Pull the control box out from the chassis carefully.
Disassembly of the parts
Panel Front
Connector
Step Motor Connectors
Sensor Connector
4Way/Fan Connector
Comp Connector
Motor
Power Connector
Connector
Power Connector
Comp Connector
Service Manual 129