Xerox WorkCentre 5735 Secure Installation And Operation page 9

determine whether to delete or continue processing of the job: Scanning Pause window, Printing Pause window, Copy Only
(Scanning and Printing) Pause window, Scanning/Printing (Simultaneous Jobs) Pause window, Scanning Build Job
Segment (No Printing) Pause window, Printing Build Job Segment (No Scanning) Pause window or Scanning Build Job
Segment/Printing Another Job Pause window.
•
User Interface Diagnostics - Allows the user to run diagnostics on the User Interface software. Is accessible by pressing the
machine hard buttons 'Dial Pause' + '*' + '#' in that order.
•
Encryption/Decryption in Progress Pop-Up Screen – Informs the user that the systems is performing an encryption or
decryption of data stored on the Network Controller hard disk. The Data Encryption/Decryption in progress pop-up screen
will appear automatically whenever a machine that is in an operational mode receives a request that requires data stored
on the Controller hard disk to be either encrypted or decrypted.
17. The Web UI provides a set of on-line help pages that provide guidance on most of the Web UI pages. These on-line help pages
can be accessed from the Web UI by selecting the [Help] button on the upper right hand corner of every Web UI page; the on-
line help page corresponding to the Web UI page being viewed will be displayed. There is also a 'TOC' contents list of all Web UI
help pages to the left of each help page; scrolling through the content list and selecting the desired page will also cause the
applicable on-line help page to be displayed.
The following pages are available from the Web UI with System Administrator login and authentication but are not
documented in the SAG, User's Guides or the on-line help:
•
Certificate Key Length - Allows the System Administrator to define the minimum encryption key length. Is accessible by
selecting the Properties tab and then selecting the following entries from the Properties 'Content menu': Security
Security Certificates
•
SMB Filing - Allows the System Administrator to set whether information set to/from the device using SMB will be
encrypted. Is accessible by selecting the Properties tab and then selecting the following entries from the Properties
'Content menu': Connectivity
•
Security Certificates, Domain Controller Certificates - Allows the System Administrator, when the 'Authentication method
on the machine's touch interface (Touch UI)'
11
"Smart Cards",
the Properties tab and then selecting the following entries from the Properties 'Content menu': Security Certificates
Domain Controller Certificate(s) tab .
•
Install Domain Controller Certificates - Allows the System Administrator, when the 'Authentication method on the
machine's touch interface (Touch UI)' on the Authentication, Authorization and Personalization page is set to "Smart
Cards", to install a domain controller certificate on the device. Is accessible by selecting the Properties tab and then
selecting the following entries from the Properties 'Content menu': Security Certificates
Certificate(s) tab
•
Application Domain/Content Query - Allows the configuration of the system to perform an LDAP query for the logged-in
user's authentication
12
Address} /diagnostics/index.dhtml and then selecting 'Authentication Domain/Context Query' from the Diagnostics
Content Menu.
•
Scanning Lock Files - Allows bypassing the filename locking feature. Is accessible by typing http://{IP
Address}/diagnostics/index.dhtml and then selecting 'Scanning Lock Files' from the Diagnostics Content Menu or by
typing http://{IP Address}/diagnostics/lockFiles.dhtml.
•
Gray Other Queue Button - Allows the System Administrator to grey out the 'Other Queue' button on the Local UI. Is
accessible by typing http://{IP Address}/diagnostics/index.dhtml and then selecting 'Grey Other Queues Button' from the
Diagnostics Content Menu or by typing http://{IP Address}/diagnostics/hideotherqueuesbutton.php.
•
Secure Print Alphanumeric PIN - Allows the System Administrator to set the secure print PIN to be alphanumeric
characters instead of just digits. Is accessible by typing either http://{IP Address}/diagnostics/index.dhtml and then
selecting 'Secure Alphanumeric PIN' from the Diagnostics Content Menu or by typing http://{IP
Address}/diagnostics/secureprintalphanumericpin.php.
•
Secure Attribute Editor - Allows the user to change some system attributes related to PDLs (e.g., memory usage, copies per
page, etc.). Is accessible by typing http://{IP Address}/diagnostics/secureattr.dhtml.
10
'Touch UI' is another term for the Local UI.
11
See the Authentication Configuration section starting on page 156 of the SAG on how to set this parameter.
12
{IP Address} is the IPv4 address of the machine
Certificate Key Length.
Protocols
to manage domain controller certificates installed or to be installed on the device. Is accessible by selecting
Install Domain Controller Certificate button.
domain prior
SMB Filing.
10
on the Authentication, Authorization and Personalization page is set to
to authenticating the server. Is accessible
Domain Controller
by typing http://{IP
8