Defining The Entry Mode - Siemens HiPath 500 Operating Instructions Manual

Step by Step
20 Account code
3 Trunk group mode
+=Next
US:Save
UK:Confirm
* =Change
0=Non-verified
1=Forced

Defining the Entry Mode

You can define one of two criteria for account code en-
try for each trunk group.
Non-verified entry (default):
You can enter an account code on any telephone before
a call is initiated and, therefore, also before a trunk is
seized. While a call is in progress, you can enter an ac-
count code only from a system telephone.
Forced entry:
You must enter an account code before a call is initiated
(after a trunk group is seized). The account code is then
verified in accordance with the variant you have pro-
grammed
Account code entry is not mandatory for incoming calls.
Prerequisite: System administration has been started
page 10.
Select and confirm.
Select and confirm.
or
fdg
Enter the code.
Select trunk group:
u v
or Press these keys.
or
Confirm.
or
r o
Enter the trunk group directly and
Confirm your entry.
q
Enter the code.
or
Select and confirm.
Select and confirm.
or
page 32.
Account Code
33