Table of Contents
Advertisement
Quick Links
USER GUIDE
NI PXIe-1062Q Power Supply
Shuttle
This power supply is not compatible with any other National Instruments chassis.
Caution
Introduction
Unpacking
The NI PXIe-1062Q power supply shuttle is a replacement part for the
NI PXIe-1062Q chassis.
To minimize downtime caused by a power-supply failure, the
NI PXIe-1062Q chassis has a modular power supply shuttle. This power
supply shuttle includes the chassis power supply, cooling fans, and
fan-control circuitry. Key features of the power supply shuttle include:
•
Universal AC input with automatic voltage and frequency ranging
•
Over-current protection via push-reset circuit breaker
•
Remote power monitoring and inhibit via a rear-panel connector
•
Temperature-sensing module that can adjust fan speed based on
air-intake temperature to minimize audible noise
•
Circuitry to control a front-panel LED that indicates power supply
failure
Carefully inspect the shipping container and the power supply shuttle for
damage. Check for visible damage to the metal work. Check to make sure
all handles, hardware, and switches are undamaged. Visually inspect the
inside of the shuttle for any possible damage, debris, or detached
components. If damage appears to have been caused during shipment, file
a claim with the carrier. Retain the packing material for possible inspection
and/or reshipment.
Advertisement
Table of Contents
Related Manuals for National Instruments NI PXIe-1062Q
Summary of Contents for National Instruments NI PXIe-1062Q
-
Page 1: User Guide
USER GUIDE NI PXIe-1062Q Power Supply Shuttle The NI PXIe-1062Q power supply shuttle is a replacement part for the NI PXIe-1062Q chassis. This power supply is not compatible with any other National Instruments chassis. Caution Introduction To minimize downtime caused by a power-supply failure, the NI PXIe-1062Q chassis has a modular power supply shuttle. -
Page 2: What You Need To Get Started
NI PXIe-1062Q chassis (the unit being repaired) ❑ NI PXIe-1062Q power supply shuttle ❑ Read Me First: Safety and Radio-Frequency Interference ❑ NI PXIe-1062Q User Manual (provided with the chassis; also available at ni.com/support ❑ #1 Phillips screwdriver Description Refer to Figure 1 to locate user-accessible components on the power supply shuttle. -
Page 3: Installation And Maintenance
Caution Many components within the NI PXIe-1062Q chassis under repair are susceptible to static discharge damage. Service the chassis only in a static-free environment. Observe standard handling precautions for static-sensitive devices while servicing the chassis. -
Page 4: Installation
Never connect the AC power cable to the power supply shuttle until you install it Caution in a NI PXIe-1062Q chassis. Do not use, test, or configure the power supply shuttle outside of a chassis. The power supply shuttle is a replacement part for the NI PXIe-1062Q chassis. -
Page 5: Connecting Safety Ground
Input current rating......... 8 A Over-current protection......10 A circuit breaker Line regulation 3.3 V..........<±0.2% 5 V........... <±0.1% ±12 V ..........<±0.1% The operating range is guaranteed by design. © National Instruments Corporation NI PXIe-1062Q Power Supply Shuttle User Guide... - Page 6 Maximum total power is 353.6 W. The maximum power dissipated in the system slot should not exceed 140 W. The maximum power dissipated in a peripheral slot should not exceed 30 W. NI PXIe-1062Q Power Supply Shuttle User Guide ni.com...
- Page 7 +12 V and –12 V......Clamped at 26 to 29 V difference between +12 and –12 V outputs Power supply shuttle MTTR ....Replacement in under 5 minutes © National Instruments Corporation NI PXIe-1062Q Power Supply Shuttle User Guide...
- Page 8 Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.