USER GUIDE NI PXIe-1085 Modular Power Supply The NI PXIe-1085 modular power supply is a replacement part for the NI PXIe-1085 chassis. This power supply is not compatible with any other National Instruments Caution chassis. Introduction To minimize downtime caused by a power-supply failure, the NI PXIe-1085 chassis has a modular power supply.
Do not use, test, or configure the power supply outside of a chassis. The power supply is a replacement part for the NI PXIe-1085 chassis. The NI PXIe-1085 User Manual contains all of the most up-to-date chassis service procedures, including removal and replacement of power supplies.
Page 4
The fan-speed selector switch is on the rear panel of the power supply. Select High for maximum cooling performance (recommended) or Auto for quieter operation. Set the Inhibit Mode switch to the Default position. 4 | ni.com | NI PXIe-1085 Modular Power Supply User Guide...
Page 6
+12 V 45 A -12 V 2.0 A Maximum combined +3.3 V, +5 V, and +12 V power is 699 W. Notes Maximum total usable power is 701.5 W. 6 | ni.com | NI PXIe-1085 Modular Power Supply User Guide...