3.2
Scan-to-Send function
Checking the cable connection
Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.
Checking network settings of this machine
Tap [Utility], and select [Device Information].
Check that the IP address is displayed.
•
For IPv4 environment
If no IP address is displayed, you need to configure the network.
-
Tap [Utility], and select [Administrator Settings] - [Network Settings] - [TCP/IP Settings]. Configure the
required settings to suit your environment. For details, refer to the [User's Guide Online] on the DVD.
d
Reference
In general, the default settings are available for network connection; however, some network environments
require a change on network settings. For details, refer to the [User's Guide Online] on the DVD.
d-Color MF222 plus/MF282 plus/MF362 plus/MF452 plus/MF552 plus
•
For IPv6 environment
3
3-29