Internal Laser Radiation; Cdrh Regulations; For European Users - Olivetti d-COLOR MF222 plus Quick Start Manual

1.3 Regulation notices

Internal laser radiation

Maximum Average Radiation Power: 11.2 μW (d-Color MF552 plus) / 9.4 μW (d-Color MF452 plus) / 7.4 μW
(d-Color MF362 plus) / 6.0 μW (d-Color MF222 plus/MF282 plus) at the laser aperture of the print head unit.
Wavelength: 770-800 nm
This product employs a Class 3B laser diode that emits an invisible laser beam.
The laser diode and the scanning polygon mirror are incorporated in the print head unit.
The print head unit is NOT A FIELD SERVICE ITEM:
Therefore, the print head unit should not be opened under any circumstances.

CDRH regulations

This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the
Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United
States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device
does not produce hazardous laser radiation.
The label shown on page 1-11 indicates compliance with the CDRH regulations and must be attached to la-
ser products marketed in the United States.
7 CAUTION
Use of controls, adjustments or performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
- This is a semiconductor laser. The maximum power of the laser diode is 15 mW and the wavelength is
770-800 nm.

For European users

7 CAUTION
Use of controls, adjustments or performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
- This is a semiconductor laser. The maximum power of the laser diode is 15 mW and the wavelength is
770-800 nm.
d-Color MF222 plus/MF282 plus/MF362 plus/MF452 plus/MF552 plus
Laser Aperture of
the Print Head Unit
Print Head
1-9
1