Notizen / Notes - Bicker IUPS-401-B1 User Manual

Reboot function
If mains voltage returns after a power failure while Windows® is already shutting down, the UPS
switches the PC off (after the shut-down period) and switches it on again after approximately 30
seconds (observe BIOS settings of mainboard).
Status display and Alarm
LED Alarm
green –
green flashing –
red flashing 2 beeps every 3 sec.
red flashing (quickly) 4 beeps per sec.
red permanent sound
red flashing (quickly) 8 beeps per 2 sec.,
2 sec. stillness
red flashing (quickly) 8 beeps per 2 sec.,
2 sec. stillness
red flashing (quickly) –
22
User's Manual IUPS-401-B1
Alarmsound Status display
disengageable
Normal UPS mode
Battery charge (mains mode)
yes UPS battery mode
no UPS battery mode (Battery low)
no Overload (mains mode)
no Internal UPS failure
yes Overtemperature
Battery defect
User's Manual IUPS-401-B1
Notizen / Notes
23