Lionel CW-80 Transformer Owner's Manual page 9

experiencing the features of the CW-80 Transformer (continued)
BELL
The BELL button will activate all RailSounds bells. Press and hold the BELL button for two
to three seconds to begin the sounds; press and hold the button again to turn off the ringing.
Do not activate horns, whistles, or bells on RailSounds-equipped locomotives until
note!
track power has been turned on for a few moments, or a continuous horn/whistle
or bell sound may occur. To correct this problem, simply turn off the CW-80
Transformer, then turn it back on.
The CW-80 Transformer may cause random whistles in the Lionel Mighty Sounds of
note!
Steam™ tenders with a three-pin connector. We recommend that you a purchase a
RailSounds-equipped tender to solve this problem.
Direction
press the dirECtion button to go forward
or reverse, or to place the locomotive in
"neutral" (no movement, headlight is on).
Power-on indicator
the green light
illuminates when the
Cw-80 is on.
Whistle/Horn
activates the whistle or horn sound
effect in your lionel locomotives. press
whistlE/horn to begin the sound;
release the button to end it.
Figure 4. Transformer features
Bell
starts or stops the tolling bell in any
railsounds-equipped locomotive.
press bEll to begin the sound,
again to stop it.
Throttle
Controls your locomotive's speed. throw the
throttle forward to increase locomotive speed,
backward to slow it down.
9