Message Waiting - Panasonic KX-TD816CE Installation Manual

3 Features
Feature References
Operation References
—User Manual
M
essage Waiting
Description
Conditions
Programming References
[121] Assignment of Denomination
[212] Call Duration Count Start Time
[417] CO Line Name Assignment
[423] Pay-Tone Assignment
Station Programming.......................................................User Manual
Charge Fee Reference – New Rate Set
Section 3, Features,
Charge Fee Reference
DPT Features,
Display Call Information
The system supports the ability to inform the called party of a
waiting message. The user, with a MESSAGE button, knows there
is a message if the LED of the MESSAGE button is lit red. Even if
the button is not provided nor assigned, the called party hears a
special dial tone, when he / she goes off-hook. Pressing the lit
MESSAGE button also means to call back the extension that left
the message or listen to the messages which are stored in the
mailbox of a Voice Processing System.
• For a proprietary telephone which is not provided with a MESSAGE
button, a flexible CO button can be assigned as the MESSAGE button
either by System or Station Programming.
• Cancelling a message can be performed from the extension setting it or
from the extension receiving it.
• The system supports a maximum of 128 simultaneous messages.
• Messages are always left on the original extension. It is not sent to a
Call Forwarding or Station Hunting destination.
• A single line telephone or KX-T7052 user will hear the ring tone as a
notification, if he / she receives a message. It is programmable to set
the interval of a ring tone by System Programming.
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Message
[216] Message Waiting Ring Interval Time
[990] System Additional Information, Field (9)
Station Programming.......................................................User Manual,
Flexible Button Assignment – Message Waiting (MESSAGE) Button
M
47