Make A Call Using Power Fail Back-Up Mode; Answer A Call Using Power Fail Back-Up Mode - VTech CS6319 User Manual

4.12.3

Make a Call Using power fail back-up Mode

If there is only one registered handset:
1. Once the handset is placed onto the main base unit, enter the telephone number,
and then press
or
Lift up the handset and enter the telephone number and place it back onto the
base unit within 60 seconds.
2. The speakerphone will automatically turn on and the call is made. The handset
may display "Please wait..." while the handset starts up the base before dialling.
3. To end the call, press
If there is more than one registered handset:
The handset on the base unit should be left as a power supply of the base and you
can use the other handset(s) to make calls as normal.
note
The handset should always remain on the base unit for the entire length of the call.
4.12.4

answer a Call Using power fail back-up mode

If there is only one registered handset:
1. When the phone rings, keep the handset on the base. Press
the call. The speakerphone will automatically turn on and the call is answered.
2. To end the call, press
If there is more than one registered handset:
The handset on the base unit should be left as a power supply of the base and you
can use the other handset(s) to receive calls as normal.
notes
• The handset should always remain on the base unit for the entire length of the
call.
• The range of the base unit is limited under the Power Fail Back-up mode. Keep
the handset close to the base unit.
or
.
.
.
20
or to answer