4.12.2
To activate power fail back-up Mode
If Auto is selected:
1.
During a mains power interruption, the handset will show "Place in cradle to pwr
up base".
2.
Place the handset onto the base unit to start up the base.
3.
The handset will display "Power outage on don't pick up".
or
1.
If the handset is already on the base unit, it will automatically activate the Power
Fail Back-up mode and start up the base.
2.
The handset will display "Power outage on don't pick up".
If Manual is selected:
1.
During a mains power interruption, the handset will show "To pwr up base press
TALK OFF".
2.
Press
.
3.
Place the handset onto the base unit to start up the base.
4.
The handset will display "Power outage on don't pick up".
or
1.
If the handset is already on the base unit, just press
2.
The handset will display "Power outage on don't pick up".
notes
•
Power Fail Back-up mode will not work if the handset battery power is not
sufficient (i.e. lower than level 2).
•
Do not pick up the power supplying handset from the base when Power Fail Back-
up mode is activated.
•
Do not touch the charging contacts of the power supplying handset during Power
Fail Back-up mode.
•
In Power failure back-up mode, none of the base functions will operate.
•
It may take up to 90 seconds for the base and handset(s) to synchronise during
the power failure back-up activation process.
to start up the base.
19