To Mute The Microphone; Using A Bluetooth Wireless Headset (Lip-8024D Only) - LG-Ericsson LDP-7008 D User Manual

LIP-8040L User Guide
To use the Speakerphone to answer or place a call:
 Press
audio to the speaker and the microphone.
To control the volume of the Speakerphone or handset:
 Press the VOL▲ VOL▼ button.

To Mute the microphone:

 Select the M
To turn off Mute (turn the microphone ON):
 Press the M
To activate Group Listen while on an active handset call:
 Press the
2.4 Using a Bluetooth Wireless Headset
Additionally, you may switch between the handset and
Speakerphone during a call. By keeping the handset
Off-hook, the Group Listen feature is activated, which
provides incoming audio over the speaker with outgoing
audio from the handset. This permits a local 'group' to
listen to both sides of the conversation without
interfering with the conversation.
While in a conversation using the Speakerphone, Mute
the microphone using the M
active, the M
off Mute, press the M
With Auto Speaker Select, activating or accessing a
feature by pressing its button will activate the
Speakerphone automatically.
When using a Headset, the
ON/OFF-hook state for the phone.
, the phone goes off-hook and sends
SPEAKER
button.
UTE
button.
UTE
button.
SPEAKER
The iPECS LIP-8040L may be equipped with a
Bluetooth Unit (BTU) allowing you to use a wireless
headset that supports Bluetooth version 2.0. Using a
headset permits you to move freely around the phone
(within approximately 10 meters) and maintain a
conversation. Before using the headset, the headset
must be "paired" with the BTU, and then the headset
must be enabled for use. Operation of the iPECS LIP-
8040L with the headset is the same as with the
UTE
button LED will be illuminated. To turn
UTE
button again.
UTE
SPEAKER
13
button. When Mute is
button controls the