Removing The Front Side Cover; Installing The Front Side Cover - KTM 990 Adventure Baja Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.6

Removing the front side cover

Info
The operations are the same on the left and right sides.
11.7

Installing the front side cover

Info
The operations are the same on the left and right sides.
–
Move the handlebar to and fro over the entire steering range.
It must be possible to move the handlebar easily over the entire steering range. There
should be no detectable detent positions.
» If detent positions are detected:
–
Adjust the steering head bearing play.
–
Check the steering head bearing and adjust if necessary.
–
Remove screws
–
Carefully swing out the side cover
of the turn signal cables.
–
Pull off the overflow hose of the fuel tank and take off the trim.
B00893-10
.
1
at the top and disconnect the plug-in connectors
2
x
90