Press the [Start] key.
Depending on the machine's setting, the
following screen appears on the display.
CMF141
Black-and-white scanning mode:
Color or gray scale scanning mode:
Press the appropriate selection key for the desired file for-
mat.
Depending on the machine's settings, you
may see the screen on the right on the
display when scanning from the exposure
glass. If you see this screen, proceed to
step 6. If not, proceed to step 8.
If you have more originals to scan, place the next original on the
exposure glass, and then press [Yes]. Repeat this step until all
originals are scanned.
When all originals have been scanned, press [No] to start sending
the scanned file.
Confirm that "Ready" appears on the display.
The scanned file is created in the root directory of the USB flash disk.
Remove the USB flash disk from the machine.
19