Fit The Installation Frame - Medion MD 81485 Manual

CarRadio MD 81485_AUS.fm Seite 8 Donnerstag, 17. August 2006 7:50 07
Installation

Fit the installation frame

• Before installation, always use a phillips
head screwdriver to remove the two
transport safety screws in the top part of the
radio casing (marked with red flags)!
• The car radio is delivered with the
installation frame fitted over it. Firstly
remove the mounting frame from the car
radio casing. To do this, push down the two
clips on the sides of the car radio (1) and
push the mounting frame off the radio from
behind (2).
• Insert the mounting frame in the ISO
installation slot.
• In order to fix the mounting frame in the
installation slot, use a screwdriver to bend
out as many clips as possible. Choose the
clips which fit tightly against the installation
slot casing.
Next, check that the frame fits tightly. The frame must be tightly fitted, to
prevent it from coming loose if the driver brakes sharply.
8