Advertisement

O
VERVIEW
Operating Part
AF:
1.
Set the Radio Data System Mode
SCN
2.
: Search for AF transmitters
REL: RELEASE
3.
4.
EJ: EJECT Eject CD
MULTIJOG
5.
: Induction regulator: control the selected audio setting (SEL)
6.
CD compartment
7.
Display
BND
8.
: BBand selection in the Radio Mode; display ID3 tag Information in the
MP3 Mode
MU:
9.
Mute
10.
MMC/SD slot
TA
11.
: Traffic alarm
PTY:
12.
Display PTY information
SEL:
13.
Press for a short time repeatedly, to select the following audio settings:
Volume, bass, treble, balance, fader; in car radio: press longer repeatedly,
to select between different car radio settings
In the case of an MP3 title search: Confirm each entry with letters in the case
of an MP3 search;
EON Settings menu
A.P.
14.
: Automatic storage of station / play station,
MP3 title, file and directory search
15. 19.: M1 M6 station buttons
TOP/PLAY/PAUSE
15.
Play the first title, number button M1
INT
16.
: Play the title, number button M2
RPT
17.
: Set the Repeat function, number button M3
RDM
18.
: Random, number button M4
19.
Number button M5, number button M6
TUNE/ TRACK/ SKIP +:
20.
TUNE/ TRACK/ SKIP -:
MOD:
21.
MODE Choose between radio and CD operation
CL
22.
:Set / display the time; Call up information in the Radio Mode Radio Data
System;
If no Radio Data System information has been received: Call up the frequency
and the time
MD 81460
Remove operating part
: Start / interrupt reproduction /
Forwards search for station / CD title
Backwards search by station / CD title
EN
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MD 81460 and is the answer not in the manual?

Questions and answers

Adjei Richard
February 9, 2025

I want to change the country name

Subscribe to Our Youtube Channel

Summary of Contents for Medion MD 81460

  • Page 1 MODE Choose between radio and CD operation :Set / display the time; Call up information in the Radio Mode Radio Data System; If no Radio Data System information has been received: Call up the frequency and the time MD 81460...
  • Page 2 Overview POWER OFF : Press briefly to switch the radio off. To switch the radio on, press any button except for the buttons EJ and REL. : USB connector Covering for the USB connection Behind control panel RESET : reset to factory settings Theft LED: flashes if the operating part has been removed...
  • Page 3: Table Of Contents

    Troubleshooting ....... . . 24 Disposal information ......25 MD 81460...
  • Page 4: Safety Instructions

    Safety instructions AFETY INSTRUCTIONS About these instructions Please read these instructions carefully before using the device. Note the warnings on the device and in the operating instructions Store the operating instructions in the car. If you sell or give the car radio away, please ensure that you also pass on these instructions.
  • Page 5: Cleaning The Device

    Use a soft, dry cloth to clean the device. Avoid the use of chemical solutions and cleaning products, because these may damage the unit's surface and/or the la bels on it. Installation Read the installation and connection information in this introduction, if you want to install your car radio yourself. MD 81460...
  • Page 6: Installation

    Installation NSTALLATION Installation instructions • Place the device in the shaft provided for it or select a position, where it will not impair the driving tasks of the driver, for the installation of the device. • Connect the cable for a short time, before you finally install the device. Ensure that the cable is plugged in correctly and that the system functions correctly.
  • Page 7: Examples Of Connection

    Otherwise, the station memory will be unable to function. You can connect an external amplifier to the RCA cable (red and white Cinch connection). Pay attention to the operating instructions of the external amplifier for this. Four loudspeakers (Quad system)) Two loudspeakers (Dual system) MD 81460...
  • Page 8: Fit The Installation Frame

    Installation Fit the installation frame • Before installation remove the two transport safety screws in the top part of the radio casing (marked with red flags)! Installation The car radio is designed to be fitted in a standard ISO installation slot. If your vehicle has no ISO slot, please consult a specialist garage, dealer, or the specialist department of a large store.
  • Page 9: The Iso Adapter Plug

    This relay cable can also be used to control an external amplifier. Please refer to the amplifier's operating instructions for the correct connections. Never connect the blue cable to the engine cable; this could damage the radio! MD 81460...
  • Page 10: Removing The Unit

    Installation Occupation of the ISO blocks BLOCK B Loudspeaker BLOCK A Power Supply Lower right + Lower right Front right + Front right Continuous plus (perma nent 12V on board voltage) Front left + Car aerial (also for external amplifiers, etc.) Front left Lower left + Switch plus (switched for...
  • Page 11: Operating Part

    Removing the operating part • Press the REL button (3). The operating part will be re leased and you will be able to remove it to the left. Always keep the operating part in the case for protection. MD 81460...
  • Page 12: Operation

    Operation PERATION Basic operation Switching on/off • Press any button, apart from the EJ (4) or REL (3) buttons, to switch on the radio. The radio will also switch itself on as soon as a data medium (USB / MMC / SD) has been inserted •...
  • Page 13 Turn the MULTIJOG induction regulator (5) to the right to set the hours or to the left to set the minutes. Press the CL button (22) again or wait until the display has switched back, to store the new time. MD 81460...
  • Page 14: Radio Functions

    Operation Radio functions Selecting the radio frequencyn • Press the BAND/ENTER button (19) to switch between FM (FM1, FM2 & FM3) and AM (AM1 & AM2). You can store up to 6 stations in each band. Searching for a station •...
  • Page 15: Radio Data System

    Regional Mode off. REG ON: The radio will search for stations with traffic announcements only within the region. REG OFF: The radio will search for stations with traffic announcements only outside the region. MD 81460...
  • Page 16: Eon Settings Menu

    Operation TA (Traffic Announcement) TRAFFIC RADIO The radio will be changed to automatically in CD operation if traffic radio is trans mitted, if the TA function has been switched on (TA will appear in the display). Stations transmitting traffic announcements will be indicated by TP in the dis play.
  • Page 17 FLAT,POP M,CLASSICS or ROCK: different digital effects for the audio out put. Please pay attention to the fact that the BAS (bass) and TRE (treble) set tings will not be available by pressing the SEL button (13), if the digital ef fect has been switched on. MD 81460...
  • Page 18 Operation LOUD ON or LOUD OFF LOUD ON: Loudness switched on (sound amplification). LOUD OFF: Loudness switched off (no sound amplification). STEREO/MONO Set audio output to stereo or monotone. The stereo symbol will appear in the display when a stereo station is being received DX or LOCAL DX: The sensitivity of the reception is aligned to stations outside the region.
  • Page 19: Pty Functions

    Please pay attention to the fact that this information depends on the region, the radio station and the broadcaster. 'PTY NONE' will appear in the display if you are not receiving any Radio Data System or PTY information. MD 81460...
  • Page 20: Playing Audio Cds

    Operation Playing Audio CDs Further information on playing CDs Moisture and high humidity may cause the CD player to malfunction. If this occurs, switch on the vehicle's heater to evaporate the moisture before use. Do not expose the CD player to extremely high or low temperatures. Inserting and removing CDs •...
  • Page 21: Playing Mp3 Cds

    MULTIJOG induction regulator (5) and confirm with SEL (13). The cursor will move to the next position. • Now enter the second digit of the title number with the MULTIJOG induction regulator (5). Confirm with SEL (13). The title with the number entered will be reproduced. MD 81460...
  • Page 22 Operation Searching for track names (letters) • Press the button A.P. (14) twice. • Now, you will be able to search for the start of a title with the MULTIJOG induc tion regulator (5), by entering a letter in accordance with the table below. Move to the file found with SEL (13).
  • Page 23: Playing The Data From Usb/Sd/Mmc Data Media

    (7), as soon as a card has been inserted. The ope ration to play the files on an SD or MMC card and the search function work precisely as in the case of MP3 CDs. MD 81460...
  • Page 24: Troubleshooting

    Troubleshooting ROUBLESHOOTING Information concerning electrostatic charging: Reset the device, by separating it from the net temporarily, if it does not function correctly because of electrostatic charging Problems Possible Causes Suggestions The device cannot The ignition is not switched on. Switch on ignition by turning be switched on.
  • Page 25: Disposal Information

    All packaging and packaging materials that are no longer required, can and, should be recycled. Device At the end of its life, the radio should not be disposed of as household garbage. Enquire about the options for proper, environmentally friend ly disposal. MD 81460...
  • Page 26 Technical data ECHNICAL DATA GENERAL Operating voltage: DC 14.4 V, negative earth connection Casing dimensions: 178 x 165 x 50 mm (W x D x H) Output power: 4 x 25 R.M.S. RADIO (frequency ranges) 87.5 – 108 MHz 522 – 1620 kHz CD/MP3 PLAYER Laser output: Class 1 laser product...
  • Page 27 Technical data MD 81460...
  • Page 28 Technical data...

Table of Contents