Control Panel; Reset; Removing The Unit - Medion MD 81485 Manual

CarRadio MD 81485_AUS.fm Seite 11 Donnerstag, 17. August 2006 7:50 07

Control panel

Inserting the control panel
• First place the right side of the
control unit with its lower right
corner on the pin in the lower
right corner of the frame.
• Then press the lower left side
until it clicks into place.
• Flip the control panel upwards.
Check that the control panel is
properly in place and secure. If the
control panel is not fitted properly,
error messages appear in the
display and/or several keys will not function properly.
Removing the control unit
• Press the REL button [7].
• Push the control unit slightly to
the right and pull down first the
left hand side and then the right.
If the control unit has not been inserted in the frame, the anti theft LED will
flash on the unit.
For protection, always keep the control unit in its case.

RESET

In order to start the radio working, press the RESET [23]
button with the point of a ballpoint pen or something else
sharp.

Removing the unit

• Remove the control unit.
• Pull out the frame.
• Insert the right and left keys in the slots
on the sides of the set. The flaps will be
bent back and you can remove the set.
MD 81485
Installation
11