Fit The Installation Frame - Medion MD 81460 Instruction Manual

Installation

Fit the installation frame

• Before installation remove the two transport
safety screws in the top part of the radio casing
(marked with red flags)!
Installation
The car radio is designed to be fitted in a standard
ISO installation slot. If your vehicle has no ISO slot, please consult a specialist
garage, dealer, or the specialist department of a large store.
• Remove the mounting frame from the car radio casing.
• Insert the mounting frame in the ISO installation slot.
• Bend the flaps of
the installation
frame with a
screwdriver, so
that it is fixed
firmly in the in
stallation shaft
(see illustration).
• Check that the
frame fits tightly.
• Connect the ISO socket block of the car radio to both the ISO plugs of your
vehicle.
• Connect the aerial cable of the vehicle aerial to the aerial socket of the car ra
dio.
• Push the car radio carefully into the installation frame until it clickst.
Please use the ISO block of the car radio during the installation. You will ob
tain the vehicle specific ISO adapter that you may need in specialist work
shops, in specialist shops or in the specialist departments of department
stores.
The guarantee claim will lapse if the ISO block has been separated!
8