Table of Contents
Advertisement
Autoradio MD 42540_AUS.fm Seite 7 Mittwoch, 30. November 2005 9:01 09
Fit the installation frame
• Before installation, always use a phillips
screwdriver to remove the two transport
safety screws in the top part of the radio
casing (marked with red flags)!
• The car radio is delivered with the
installation frame fitted over it. Firstly
remove the mounting frame from the car
radio casing. To do this, push down the two
clips on the sides of the car radio (1) and
push the mounting frame off the radio from
behind (2).
• Insert the mounting frame in the ISO
installation slot.
• In order to fix the mouinting frame in the
installation slot, use a screwdriver to bend
out as many clips as possible. Choose the
clips which fit tightly against the installation
slot casing.
Next, check that the frame fits tightly
The frame must be tightly fitted, to prevent it from coming loose if the
driver brakes sharply.
MD 42540
Installation
7
Advertisement
Table of Contents
