Operation; Basic Operation - Medion MD 81485 Manual

CarRadio MD 81485_AUS.fm Seite 14 Donnerstag, 17. August 2006 7:50 07
O
PERATION

Basic operation

Switching on/off
Press the PWR button (1) to switch the radio on or off.
Volume
• Turn the volume control knob (2) to turn the volume up or down.
Always set the volume so that you can still clearly hear the sirens from
emergency vehicles!
Functions when pressing the volume knob
• Press SEL button to change the mode in the sequence of
VOLUME > BASS > TREBLE > BALANCE > FADER.
• Press once. When " VOL" is displayed, you can adjust the sound level by
rotating the VOL+/ VOL knob.
• Press twice. When "BAS" is displayed, you can adjust the bass effect by
rotating the VOL+/ VOL knob.
• Press three times. When "TRE" is displayed, you can adjust the treble effect
by rotating the VOL+/ VOL knob.
• Press four times. When "BAL" is displayed, you can rotate VOL+ to decrease
the sound level of left speakers or rotate VOL to decrease the sound level of
right speakers.
• Press five times. When"FAD" is displayed, you can rotate VOL+ to decrease
the sound level of rear speakers or rotate VOL to decrease the sound level of
front speakers.
Functions when holding the volume knob
• Press and hold SEL button, you can rotate VOL+/VOL to adjust the setting of
VOL 17; ADJ 00:00; DSP NONE.
• Press once. IN VOL 17 is indicated: The volume output default setting can be
adjusted. When power is on, the output level can be returned to default setting
if the output level is over the default setting. Conversely, it will maintain the
level if the output level is below the default setting.
• Press twice. ADJ 00:00 is indicated: TIMING SETTING. For time setting, hold
the SEL button until the clock display is blinking. You can rotate the volume
14