Overview Of The Device; Control Panel - Medion P62033 Instruction Manual

5. Overview of the device

5.1.

Control panel

OPEN - Fold down the control panel
1)
2) : Telephone function: press before entering a telephone number; accept
call
3) Press briefly: Search backwards through stations/music tracks; hold
down: fast rewind
4) Dial/button:
Press repeatedly to select different settings:
change settings with the dial
Each setting only remains active for a few seconds before switching back to
the default volume setting ("VOL").
Briefly press the dial to select the following audio settings:
− VOL: volume, BAS: bass, TRE: treble, BAL: balance of the left and right
speakers, FAD: fader (volume of the rear speakers).
Press the dial for longer to call up a different sequence of modes for setting
the time etc. Within this sequence, switch to the next mode by pressing brief-
ly:
− BEEP ON: Beep when buttons pressed.
− EQ OFF: Use the dial to select between the audio settings FLAT (normal),
CLASSIC, ROCK and POP (see also "Dial/button - Set the volume and
sound" on page 68).
− LOUD: Switch on loudness to increase bass and treble (ON) or switch off
(OFF).
− LOC: Local search mode (see "Turning the regional programme mode on/
off" on page 72). OFF: Normal reception.
− STEREO: In FM band select stereo or mono mode (MONO). The MONO
setting can improve the reception if stereo reception is poor.
− AF ON: Switch the regional programme mode on or off.
54 of 86
84003 DE EN eCommerce Content final REV4.indb 54 84003 DE EN eCommerce Content final REV4.indb 54 28.05.2015 09:08:53 28.05.2015 09:08:53