Control Pane; Reset; Removing The Unit - Medion MD 42540 Manual

Autoradio MD 42540_AUS.fm Seite 10 Mittwoch, 30. November 2005 9:01 09
Installation
Control panel
Inserting the control panel
• First place the right side of the
control unit with its lower right
corner on the pin in the lower right
corner of the frame.
• Then press the lower left side until
it clicks into place.
• Flip the control panel upwards.
Check that the control panel is
properly in place and secure. If the
control panel is not fitted properly, error messages appear in the display and/or
several keys will not function properly.
Removing the control unit
OPEN button [1].
• Press the
• Push the control unit slightly to the
right and pull down first the left hand
side and then the right.
If the control unit has not been inserted in the frame, the anti theft LED will
flash on the unit.
For protection, always keep the control unit in its case.

RESET

In order to start the radio working, press the
button with the point of a ballpoint pen or something else
sharp.

Removing the unit

• Remove the control unit.
• Pull out the frame.
• Insert the right and left keys in the
slots on the sides of the set. The flaps
will be bent back and you can remove
the set.
10
RESET [21]