Table of Contents
Advertisement
Front display brightness
Use the
buttons to set the brightness of the receiver front display. Select the most comfortable
setting for the ambient lighting.
Loopthrough in standby
Use the
buttons (On/Off), to select whether the satellite signal present at the input to the receiver
(IF input) should be looped through to the output from the receiver (IF output) when the receiver is
in standby mode.
Time display
Use the
buttons (On/Off), to select whether the time is displayed at the front of the receiver
whilst it is in operation.
After calling up the menu you will see the
following display:
The individual items are selected using
the
buttons. The changes to the
current settings can be performed using
the
buttons or the number keys.
Local time offset (UTC)
Use the
buttons to set the time zone variation from UTC (formerly GMT) (e.g. for
Germany +1 hour).
Use the
buttons to switch to the "Automatic clock change" fi eld.
Automatic clock change
Use the
buttons to select whether the receiver should automatically change over to and
from summer and winter time. If "On" is selected, the receiver automatically sets itself to the right
time. If you select the setting "Off", you will have to manually adjust the offset from UTC in the
"Local time offset" fi eld when changing over between summer time and winter time.
update time on
Use the
buttons here to select the channel from which the receiver will take the time
information. Either:
all Channels:
The time information is taken from whatever channel is being viewed or
current Channel: The channel currently being viewed is specifi ed as the supplier of time information.
Main menu - Settings
99
Advertisement
Table of Contents
