Customize Screen Menu - Kathrein UFS 903 si Operating Manual

After calling up the menu you will see the
following display:
The individual items are selected using
the buttons. The changes to the
current settings can be performed using
the buttons or the number keys.
Scope of functions
Here you can confi gure the functional scope of your receiver. You can choose between "High", "Normal"
and "Low". The table below shows which functions are available at each confi guration step.
(red)
button
Favour-
High ites
selection
Not
Low
assigned
Favour-
Normal ites
selection
* These functions can be used only if an external USB storage medium is connected at the rear of
the receiver. For this see also "Connection and Setup", "Connecting the receiver", "USB port".
Display duration of channel message
Use the buttons to select the time after which you want the on-screen channel message display
to be automatically cancelled. The selections available are "Off", 1, 2, 3, 4, 5 or 6 seconds.
Display volume bar
Use the buttons (On/Off) to specify whether the volume bar is displayed when adjusting the
volume.
98
Main menu - Settings
(green) (yellow)
button button button
Media
Picture Options
format selection
Not as- Not as- Not as-
signed signed signed
Media
Picture Options
format selection
(blue) button
Channel
selec-
list
tion
Pro-
gramme
Guide
Pro-
selec- gramme
tion Guide
button
button
Time-
Archive*
shift*
Not
Archive*
assigned
Time-
Archive*
shift*
button
Record*
Record*
Record*