Table of Contents
Advertisement
Receiver operation
Making the settings
Saving settings and starting the clock
Return to receive mode
Timer setting
The following screen display appears:
In this menu you can set the date and time and also turn on a continuous time dis-
play on the screen.
The bottom menu line shows keys you can use to make the settings.
Select the menu line using the
The active menu entry is indicated by means of a flashing cursor (
Change the setting for continuous time display (ON/OFF) using the
keys.
For entry of date and time use the numeric keys
Always enter the date and time with 2-figure entries, thus 05.05.98 for the date
and 07:05 for the hours and minutes (not 5.5. or 7:05).
Invalid entries or incorrect values are not accepted and are ignored.
After entering the time press the
Press the
key to return to receive mode.
or
Press the
key to continue with the timer programming.
The unit is in normal mode (TV or radio mode).
Press the
key twice to call up the menu for the timer settings.
The following screen display appears:
In this menu you can make timer settings in order to start the receiver for record-
ings via a VCR.
The bottom menu line shows keys you can use to make the settings.
keys.
... .
key in order to start the clock.
).
>
13
Advertisement
Table of Contents
