Gateway EC38 Service Manual page 36

30
CHAPTER 2: System Utilities
Parameter
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
Note:
The sub-items under each device will not be shown if the device
control is set to disable or auto. This is because the user is not allowed
to control the settings in these cases.
Description
Determines if Customer
Logo will be displayed or
not; shows Summary
Screen is disabled or
enabled.
Enabled: Customer Logo
is displayed, and
Summary Screen is
disabled.
Disabled: Customer Logo
is not displayed, and
Summary Screen is
enable.
Enables, disables the
system boot from LAN
(remote server).
Enables, disables Boot
Menu during POST.
Enables, disables D2D
Recovery function. The
function allows the user
to create a hidden
partition on hard disc
drive to store operation
system and restore the
system to factory
defaults.
Choose which mode of
HDD mode. Please be
careful for changing this
setting because it might
cause system fail to boot.
Format/Option
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Disabled or
Enabled.
Option: Enabled or
Disabled
Option: AHCI Mode or IDE
Mode