Planet WNAP-W2200 User Manual page 30

300mbps in-wall poe wireless access point

Table of Contents

User Manual of WNAP-W2200

When the IP address of the WNAP-W2200 is changed, the clients on the

network often need to wait for a while or even reboot before they can access

the new IP address. For an immediate access to the AP, please flush the

netbios cache on the client computer by running the "nbtstat –r" command

before using the device name of the WNAP-W2200 to access its Web

Management page.

-22-

Table of Contents