Replace The Dust Filter - Kärcher KM 85/50 W Comfort Operating Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Operating Instructions

! Readjust the sealing strip

downwards by relocating it in the

elongated hole

! Tighten the fastening screws of

the sealing strip

! Set the vacuum sweeper upright

and push it slightly forwards

— The clearance of the front sealing

strip to the floor must be set so

that its whole width folds back

with a lag of 10 - 15 mm

! Repeat the adjustment as

required

KM 85/50 W Comfort / KM 85/50 W Classic / KM 85/50 W P Comfort / KM 85/50 W P Classic

Note:

— The sealing strip must be

replaced if, due to being too

worn, the clearance of the front

sealing strip to the floor can no

longer be adjusted

! Unscrew the fastening screws

and replace the whole sealing

strip

Rear sealing strip

! Remove the swept material

container

! Undo screws of sealing strip at

the debris container

! Replace sealing strip

! Tighten screws of sealing strip

Side sealing strips

! Loosen the fastening of the

sealing strip

! Replace sealing strip

! To adjust clearance to floor push

a 1 - 2 mm thick spacer under it

! Align the sealing strip

! Tighten the fastenings of the

sealing strip