Permobil F5 Corpus Owner's Manual page 75

Owner's Manual Permobil F5 Corpus
Memory
The control system on some seats have three memory locations for seat po-
sitions. Each memory location can store the position of the seat's adjustment
device. This means that it is easy to retrieve a seat position saved earlier.
Retrieving position from memory
1. Press the "Mode" button one or more times until a seat icon appears in
the control panel display.
2. Move the joystick to the left or right to select a memory location (M1, M2
or M3). A seat icon and memory symbol "M" for the memory location se-
lected are shown in the control panel display - see fig. 49.
3. Move and hold the joystick forwards. The seat adjusts to the position
stored earlier. For reasons of safety, the joystick must be held forwards
until the seat is fully adjusted to the required position. Once the seat has
adjusted to the saved position, it stops moving.
NOTE!
Movement of the seat can be stopped at any time by releasing the joystick.
Return to drive mode
Press the "Mode" button one or more times until a standard display image
with speed indicator appears in the control panel display - see fig. 47.
R-net Control Panel With LCD Monochrome Display
Figure 49. Memory function
activated.
75