Adjusting The Basic Position Of The Clutch Lever; Checking/Rectifying The Fluid Level Of The Hydraulic Clutch - KTM 2011 990 Supermoto T USA Owner's Manual

SERVICE WORK ON THE CHASSIS

Adjusting the basic position of the clutch lever

10.18
Info
Turn the adjusting screw clockwise to increase the distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!

Checking/rectifying the fluid level of the hydraulic clutch

10.19
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
–
Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw .

–
When adjusting the clutch lever, make sure that there is a minimum clearance to other
parts of the vehicle.
Guideline
Minimum clearance
B00608-12
5 mm (0.2 in)
97