SERVICE WORK ON THE CHASSIS
Bleeding the fork legs
10.5
Removing the seat
10.6
–
Lean the motorcycle on the side stand.
–
Remove bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Mount and tighten the bleeder screws.
Info
Carry out this operation on both fork legs.
B00621-10
–
Insert the ignition key in the seat lock
–
Raise the rear of the seat, push it towards the rear, and remove it upwards.
–
Remove the ignition key from the seat lock.
600922-10
briefly.
and turn it clockwise.
83