Wheels, Tires; Removing The Front Wheel - KTM 2011 990 Supermoto T USA Owner's Manual

WHEELS, TIRES

Removing the front wheel

12.1
x
–
Raise the motorcycle with the rear wheel stand. (
–
Raise the motorcycle with the front wheel stand. (
–
Take the speed sensor cable out of the clamp.
–
Remove screw
–
Remove screws
–
Press back the brake linings with a light lateral tilting of the brake calipers on the brake
disc. Pull the brake calipers carefully back from the brake discs and hang them to one
side.
Info
Do not pull the hand brake lever when the brake calipers are removed.
B00632-10
–
Loosen screws
–
Unscrew screw
spindle out of the axle clamp. Remove screw
Warning
Danger of accidents Reduced braking efficiency caused by damaged brake
discs.
–
B00633-10
–
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
fork.
and pull wheel speed sensor

from both brake calipers.

and .
 
about six turns and press your hand on the screw to push the wheel

Always lay the wheel down in such a way that the brake discs are not dam-
aged.
p. 82)
p. 81)
out of the hole with the sleeve.

.

111