Adjusting The Basic Position Of The Shift Lever - KTM 2011 990 Supermoto T USA Owner's Manual

TUNING THE ENGINE

Adjusting the basic position of the shift lever

15.6
x
–
Remove screw
101172-10
–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position and engage the gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle components
during the shift procedure.
–
Mount and tighten screw.
Guideline
101173-10
Screw, shift lever
and remove shift lever .
 
of the shift lever and shift shaft.

M6 10 Nm Loctite ® 243™
(7.4 lbf ft)
164