Accessories - Max ER-1500 Instruction Manual

The data stored in the internal memory or the memory card cannot be stored
permanently. We will not be responsible for damages and lost profits caused by loss
of data attributed to battery consumption, trouble, repair, and so on.
Never disassemble or modify this instrument. It could cause a fire, electric shock, or
other problems.
● Do not insert foreign substances such as fingers, pens, wire, or paper into this
instrument. It could damage the instrument or cause a fire.
● Use correct supply voltage. Other voltage level could damage the instrument.
● Do not splash water or chemicals on the instrument.
instrument, disconnect the power plug immediately from the plug socket and contact
your dealer/distributor for a repair. It could damage the instrument or cause a fire
or electric shock.
● Do not put paper or cloth on the instrument. It could cause a fire.
● Do not place any heavy material on power cord. It could cause damage or a fire.
● Never touch the metallic part of the instrument.
● Never touch the printer head. It is very hot just after printing and you could get
burned. Also, dirt on your hand could cause trouble to the printer head.
● When the instrument is not going to be operated for a long period of time, be sure to
disconnect the power cord from the power socket for your safety.
● When disconnecting the power cord, be sure to hold the power plug. Do not pull on
power cord, or the cord could be broken and cause a fire or electric shock.

ACCESSORIES

This instrument comes with the following accessories. Confirm that they are included before
using the machine.
1. Instruction manual
: 1 booklet
3. Screws for wall mounting
CAUTION
2. "Key-Card"
: 2-pcs.
- 3 -
If water gets inside the
: 2-pcs.