Setting Line Shift Time, In/Out And Daylight Saving Time (Mode 3) - Max ER-1500 Instruction Manual

SETTING LINE SHIFT TIME, IN/OUT AND DAYLIGHT
SAVING TIME (MODE 3)
Procedure
1. Insert the "Key-Card." The
mode.
2. Press the "IN2" key. The
3. Press the
4. Press the "SET" key after changing each item. The display moves to next item in the
order of Line Shift Time, IN/OUT, Overtime Start Time (OST) and Daylight Saving Time.
When the "SET" key is pressed at the end, the buzzer beeps twice and the display
returns to the start of the setting mode.
If "C-05" is displayed, press the "SET" key. (See [14] on page 21)
1. The time is displayed in only 24-hour format.
2. Initial data is displayed by pressing the "Clear" key.
[The start of setting mode]
[OUT2]
Items (MODE 3)
LST
IN 1
OUT 1
IN 2
OUT 2
OST
Daylight Saving Time Start
Daylight Saving Time End
symbol appears at "MODE 3" on the display.
or key to change each item.
[Line Shift Time]
[Overtime Start Time
(OST)]
Initial data
3 : 00
- - : - -
- - : - -
- - : - -
- - : - -
- - : - -
- - : - -
- - : - -
symbol appears on the display to indicate the setting
[IN1]
[Starting date of
Daylight Saving Time]
Contents of setting
Line Shift Time (Day change time)
Working start time (IN 1)
Working end time (OUT 1)
Working start time (IN 2)
Working end time (OUT 2)
Starting time of Overtime Work
Starting date of Daylight Saving Time
Ending date of Daylight Saving Time
- 14 -
[OUT1]
[Ending date of
Daylight Saving Time]
[The start of setting mode]
[IN2]
Code No.
01
02
03
04
05
06
07
08